Compaq and Linux Mailing List Archive
FW: [compaq-and-linux] ml370

Date view Thread view Subject view Author view

From: Alexander Oleshev (Alexander.Oleshev@ebs-europe.com)
Date: Fri Jan 12 13:48:02 2001


It's working after installing new driver from Intel!!!! It's working fine
!!!!!

Richard, I suppose, you have to correct file on your site. ml370 definitely
needs a new driver from Intel for embedded NIC.

You was right!!!

Thank you very much !!!

Alexander

-----Original Message-----
From: Alexander Oleshev [mailto:Alexander.Oleshev@ebs-europe.com]
Sent: 12 January 2001 19:25
To: 'compaqandlinux@van-dijk.net'
Subject: RE: [compaq-and-linux] ml370


Thank you, Richard,

Now we are trying to get previous situation , but we have switched it to 10
MBit mode. It's working almost fine, but sometimes stops regardless of it's
10Mb state. I'm about to install driver from Intel - so I'll inform about
the news..

Thanks,

Alexander 

-----Original Message-----
From: Black, Richard [mailto:Richard.Black@COMPAQ.com]
Sent: 12 January 2001 18:45
To: compaqandlinux@van-dijk.net
Subject: RE: [compaq-and-linux] ml370


Try to use the e100 from intel, there seems to be problems with eepro100.
http://support.intel.com/support/network/adapter/pro100/100linux.htm

Sincerely,
Richard Black
http://www.compaq.com/linux
http://www.geocities.com/rlcomp_1999
http://www.cpqlinux.com


-----Original Message-----
From: Alexander Oleshev [mailto:Alexander.Oleshev@ebs-europe.com]
Sent: Friday, January 12, 2001 10:12 AM
To: 'compaqandlinux@van-dijk.net'
Subject: [compaq-and-linux] ml370


Guys !

That's me again. New problem. As I mentioned before, I installed Linux
redhat 6.1 on ml370 succesfully, but I was wrong.. Native network adapter NC
3163 doesn't work properly with EtherExpress 100 native linux driver. At
least, it seems like that.  Sometimes, when the load on the network card
increases - it stops responding temporarily and produces messages like :
"eth0: Transmit timed out status XXXXX at command XXXXX"
"eth0: Trying to restart the transmitter"
Then , in 2-3 minutes it returns to it's normal state.  What is a problem?
Does anybody experienced it before? Any ideas ?

regards,

Alexander


---------------------------------------------------------------------
To unsubscribe, e-mail: compaqandlinux-unsubscribe@van-dijk.net
For additional commands, e-mail: compaqandlinux-help@van-dijk.net
For the archives : http://www.van-dijk.net

---------------------------------------------------------------------
To unsubscribe, e-mail: compaqandlinux-unsubscribe@van-dijk.net
For additional commands, e-mail: compaqandlinux-help@van-dijk.net
For the archives : http://www.van-dijk.net

---------------------------------------------------------------------
To unsubscribe, e-mail: compaqandlinux-unsubscribe@van-dijk.net
For additional commands, e-mail: compaqandlinux-help@van-dijk.net
For the archives : http://www.van-dijk.net

---------------------------------------------------------------------
To unsubscribe, e-mail: compaqandlinux-unsubscribe@van-dijk.net
For additional commands, e-mail: compaqandlinux-help@van-dijk.net
For the archives : http://www.van-dijk.net


Date view Thread view Subject view Author view

This archive was generated by hypermail 2b30 : Fri Jan 12 14:48:04 2001 CST